Products

Conveying thin to viscous media with or without solids.

Two ranges of pumps within the N group form the basis of all seepex progressive cavity pumps. They are available with various rotor/stator geometries (conventional, 6L, and Tricam) and can be applied in virtually all industrial sectors.

Pumps of product group W can be used in almost all industries. They are designed to handle liquids of all viscosities and even products with high solids contents. They are cost effective, portable and versatile.

seepex pumps of product group D are used for delivering and dosing small quantities in almost all branches of industry. They are especially suited for low-pulsation delivery of low to highly-viscous media as well as media containing solids and chemically aggressive media while achieving a high dosing accuracy.

seepex has released a new integrated drive for its popular lines of MD and BW progressive cavity pumps. The drive integrates the pumps with a single reduction gear box, a four-pole, TEFC, inverter-rated 1⁄2 HP electric induction motor and a “vector” type, variable frequency drive in a NEMA 4 enclosure. External or special fabricated control enclosures are not required for high pressure or run dry protection, so installation is no more complicated than a typical home stereo.

The three Product ranges of the CS product group are used primarily in the food, pharmaceutical, cosmetic and chemical industries. "C" stands for CIP (Cleaning In Place) of the pumps. CS pumps satisfy the highest requirements with regard to gentle conveying, sanitation, cleaning and sterilization. They comply with the 3-A Sanitary Standards of the USA and with EHEDG directives.

seepex pumps of product group T are used for high-consistency material with low degree of intrinsic flowability or none at all. For these pumping products, the suction lift capability of a standard pump of product group N is no longer sufficient to suck them into pipings. For this reason, pumps of product group T are equipped with a feed hopper and facilities for safe product feeding. It is successfully used in almost all branches of industry to pump viscous to airtight products.

You have many advantages when using a seepex Open Throat Pump. Read more about all the ways that seepex is better at moving highly viscous materials.

seepex semi-submersible pumps of product group E are installed vertically. They pump liquids of different viscosities, which may be abrasive or even aggressive. Due to their high degree of efficiency, the low space requirements and the maintenance-friendly design, seepex semi-submersible pumps feature low operating cost and are thus a cost-efficient alternative to other pump systems. Pumps of product group E are self-priming.

Apart from applications in processing municipal and industrial waste waters, seepex macerators are also used in a multitude of other branches of industry. They macerate the solid and fibrous components in the conveying medium, thus increasing the operating safety and service life of the downstream seepex pumps and other machinery. The degree of maceration can be varied depending on the flow rate, the drive speed and the shear plate design and can thus be adapted to diverse application conditions.